We rig Core series skiffs in our NJ shop. Ask us anything about setup, setback or engine height.
Bob's Machine Shop Bobs Plastic Thruhull fitting (1 large nut on back)
Bob’s Plastic Thru-hull fitting
SINGLE UNIT
Requires 2 per set of hoses.
The “Bob’s” style unit is a threaded unit with a large plastic nut that tightens from the inside, VS other styles that use 3 screws to attach from the outside of the boat.
This style is better as it is only drilling the one hole for the hose. However if you can not reach the inside to tighten the nut, the other style might be preferred. We have both styles here.
Requires 1″ hole drilled in hull.
**Only bulk hose can pass through this fitting. Pre-made hoses with end fittings cannot pass through. If hoses already have fittings, will need to remove them to install these and then reattach hose fitting
Specifications
- Shipping weight: 2 lbs
- Package dimensions: 5 × 5 × 5 in
Shipping & returns
Shipping options and rates are shown at checkout. Tracking is emailed as soon as your order ships.
Talk to the shop before you buy. Send your engine model and serial number and we'll help you find the right part.